What tools you need to cut a belt that is not in the right size Otherwise, you will have to fold the cut end of the belt on the inside to form a loop and reattach the ends by sewing everything together or using rivets. If you’re using a cut-to-fit belt, this part will be easy, as the belts are designed to ensure that you can customize the fit of the belt. You’ll probably have to put together the leather pieces and the screw that you had removed before cutting the belt. Depending on the design of the belt and the buckle, you may need to punch a new hole in the belt. Once you have achieved the desired length of the belt, it’s time to reinstall the buckle. It’s best if you cut off the leather bit by bit and keep measuring until you reduce the belt to the required size. Now take that measurement and mark the belt you want to cut according to that. You already have a measurement of a well-fitting belt.
So, you must remove the buckle, cut the belt, and then reinstall the buckle. You probably already know that it is the buckle end of the belt that you need to cut. Now that you know the perfect length of the belt you need, you are ready to cut the belt according to the size that you have just taken. If your belt buckle can only be attached by folding an end of the belt, remember to leave the foldable length out of all measurements. This is the length that you have to remove from the buckle end of the belt before you reattach the buckle. Measure the distance between this mark and the last hole of the belt. Imagine that you’re about to punch an extra hole in the belt to fit your waist, and mark the spot where you want the new hole on the belt to be. To be precise, use a measuring tape.Īnother way of determining the length of the belt you need is to take the belt that you’re going to cut and put it around your waist. Make sure to measure the middle circumference. That’s because it is already stretched out and a little loose. If it is an old or twisted belt, you have to exclude the hook from the measurement.To find the right size of the belt, check the cut-length of a well-fitting new belt.But ending up with a slightly smaller belt is better than a loose one. The result of purchasing an oversized belt will lead to a loose fit, and it will slip.īut an undersized belt will be too tight and leave you uncomfortable. Cutting a leather belt that is too long guide How To Size Your Belt:īuying a belt that fits you perfectly is not always easy, especially if you’re buying it online.
0 kommentar(er)
